Fence Calculator

Estimate posts, panels and material cost for a panel fence.

Reviewed Oct 22, 20261 cited source (BEA, manufacturer specs and NIST)How we calculate

Adjust prices for your state or ZIP (optional)
Know your local prices? Enter them here (optional)

Your state, ZIP and prices are saved only in this browser on this device. Your ZIP never leaves your browser. We don't use store data; the adjustment is a state-level approximation from public U.S. Bureau of Economic Analysis (BEA) data, not a local quote.

Slider runs 0 ft to 500 ft; type any amount in the box.

Slider runs 0 gates to 10 gates; type any amount in the box.

Example price only, not checked against a published source; enter what your store charges.
Example price only, not checked against a published source; enter what your store charges.
Example price only, not checked against a published source; enter what your store charges.
Results update as you type.

Estimated material cost

$1,270.00

Posts
14
Panels
12
Sections
13

Rough estimate, not a guarantee. Actual costs vary by supplier, location and project.

Estimate only. Not 100% accurate or guaranteed. Rough estimate, not a guarantee and not financial advice. Actual costs vary by supplier, location and project. Check local prices, product labels and your own measurements before you buy, and get quotes or check with a qualified pro for structural, electrical or permitted work.

Material quantities and prices are rough estimates, not a guarantee and not financial advice. Check product labels, local codes and your own measurements before you buy.

How it works

Assumes one straight run where each gate replaces one panel. Corners and ends may need extra posts; concrete and hardware are extra.

The formula

  • Sections = ⌈length ÷ post spacing⌉
  • Posts = sections + 1 (straight run)
  • Panels = sections − gates
  • Cost = posts × post price + panels × panel price + gates × gate price

How to use this calculator

  1. Measure the fence line.
  2. Enter panel width and gates.
  3. Enter your prices.

Frequently asked questions

Do I need a permit?

Many places regulate fence height and placement. Check with your local building department and HOA.

Sources

  1. BEA: Regional Price Parities by State and Metro Area: state goods price levels used for the optional regional adjustment (checked Oct 22, 2026)

Sources last checked Oct 22, 2026Written and reviewed by the Project Cost Math team against the sources above.How we calculate

Related calculators